6000 NATURAL GAS GENERATOR (1100-1500KW) Mainstream control technology(EGS02 engine intelligent management system) Advanted air-fuel ratio control technology(TEJCT air-fuel ratio automatic adjustmen) High flow and high pressure intake system adapts to
TECHNICAL PARAMETERS | |||
Generating set
model
|
BS-1100GFT | BS-1200GFT | BS-1500GFT |
Alternator model | 1FC series, Siemens technology, brushless excitation, automatic voltage control | ||
Panel model | GP1100 | GPL1200 | GPL1500 |
Rated power (kW) | 1100 | 1200 | 1500 |
Rated voltage (V) | 480V (400/6300/10500/13800) | ||
Rated frequency(Hz) | 50/60 (optional) | ||
Rated power factor | 0.8 | ||
Type of wiring | Three-phase four-wire, star connection | ||
Protection class | IP23 | ||
Insulation class | H | ||
Stabilized voltage regulation | ≤±2.5% | ||
Transient voltage regulation | ≤+20%(-15) | ||
Voltage stabilization time | ≤1.5 s | ||
Fluctuation of voltage | ≤1.0% | ||
Stabilized frequency regulation | 0~5% | ||
Instantaneous frequency regulation | ≤±10% | ||
Frequency stabilization time | ≤7 s | ||
Fluctuation rate of frequency | ≤0.5% | ||
Overall dimension (mm) | 6660×2335×2520 | 7175×2516×2540 | 7260×2516×2540 |
Weight kg | 19800 | 23000 | 24000 |
Engine model | H16V190ZLT-2 | H16V190ZLT2-2 | H16V190ZLT-1 |
Type | Four-stroke, V-shaped, turbocharged, inlet air cooling, spark ignition,external-mixing electronic control | ||
Number of cylinder | 16 | ||
Bore (mm) | 190 | ||
Stroke (mm) | 215 | ||
Total displacement (L) | 97.53 | ||
Rated speed (r/min) | 1000 | 1200 | |
Rated power (kw) | 1200 | 1300 | 1600 |
Idle speed | 700r/min | ||
Gas pressure | 100~400 KPa | ||
Gas consumption | ≤9500kJ/kW·h | ||
Oil consumption | ≤0.6g/kW·h | ||
Exhaust temperature(before turbocharged) | ≤650℃ | ||
Heat water temperature | < 85℃ | ||
Intercooling water tem. | < 45℃ | ||
Oil temperature | < 90℃ | ||
Speed regulation rate | 0~5 % | ||
Type of cooling | Water cooling, open type with cooling tower, close type with vertical radiator or horizontal radiator | ||
Lubrication method | Press and spray lubrication | ||
Starting method | Electric starting | ||
Direction of rotation | Anticlockwise (facing the power output end) |